1. Login with root user ID a
2. Using the whole primary hard disk for LVM partition:
fdisk /dev/hda
At the Linux fdisk command prompt
1. press n to create a new disk partition,
2. press p to create a primary disk partition,
3. press 1 to denote it as 1st disk partition,
4. press ENTER twice to accept the default of 1st and last cylinder – to convert the whole secondary hard disk to a single disk partition,
5. press t (will automatically select the only partition – partition 1) to change the default Linux partition type (0×83) to LVM partition type (0×8e),
6. press L to list all the currently supported partition type,
7. press 8e (as per the L listing) to change partition 1 to 8e, i.e. Linux LVM partition type,
8. press p to display the secondary hard disk partition setup. Please take note that the first partition is denoted as /dev/hdb1 in Linux,
9. press w to write the partition table and exit fdisk upon completion.
3. Next, this LVM command will create a LVM physical volume (PV) on a regular hard disk or partition:
pvcreate /dev/hda1
4. Now, another LVM command to create a LVM volume group (VG) called vg0 with a physical Extent size (PE size) of 16MB:
vgcreate -s 16M vg0 /dev/hdb1
Be properly planning ahead of PE size before creating a volume group with vgcreate -s option!
5. Create a 400MB logical volume (LV) called lvol0 on volume group vg0:
lvcreate -L 400M -n lvol0 vg0
This lvcreate command will create a softlink /dev/vg0/lvol0 point to a correspondence block device file called /dev/mapper/vg0-lvol0.
6. The Linux LVM setup is almost done. Now is the time to format logical volume lvol0 to create a Red Hat Linux supported file system, i.e. EXT3 file system, with 1% reserved block count:
mkfs -t ext3 -m 1 -v /dev/vg0/lvol0
7. Create a mount point before mounting the new EXT3 file system:
mkdir /mnt/vfs
8. The last step of this LVM tutorial – mount the new EXT3 file system created on logical volume lvol0 of LVM to /mnt/vfs mount point:
mount -t ext3 /dev/vg0/lvol0 /mnt/vfs
To confirm the LVM setup has been completed successfully, the df -h command should display these similar message:
/ dev/mapper/vg0-lvol0 388M 11M 374M 3% /mnt/vfs
Some of the useful LVM commands reference:
vgdisplay vg0
To check or display volume group setting, such as physical size (PE Size), volume group name (VG name), maximum logical volumes (Max LV), maximum physical volume (Max PV), etc.
pvscan
To check or list all physical volumes (PV) created for volume group (VG) in the current system.
vgextend
To dynamically adding more physical volume (PV), i.e. through new hard disk or disk partition, to an existing volume group (VG) in online mode. You’ll have to manually execute vgextend after pvcreate command that create LVM physical volume (PV).
2. Using the whole primary hard disk for LVM partition:
fdisk /dev/hda
At the Linux fdisk command prompt
1. press n to create a new disk partition,
2. press p to create a primary disk partition,
3. press 1 to denote it as 1st disk partition,
4. press ENTER twice to accept the default of 1st and last cylinder – to convert the whole secondary hard disk to a single disk partition,
5. press t (will automatically select the only partition – partition 1) to change the default Linux partition type (0×83) to LVM partition type (0×8e),
6. press L to list all the currently supported partition type,
7. press 8e (as per the L listing) to change partition 1 to 8e, i.e. Linux LVM partition type,
8. press p to display the secondary hard disk partition setup. Please take note that the first partition is denoted as /dev/hdb1 in Linux,
9. press w to write the partition table and exit fdisk upon completion.
3. Next, this LVM command will create a LVM physical volume (PV) on a regular hard disk or partition:
pvcreate /dev/hda1
4. Now, another LVM command to create a LVM volume group (VG) called vg0 with a physical Extent size (PE size) of 16MB:
vgcreate -s 16M vg0 /dev/hdb1
Be properly planning ahead of PE size before creating a volume group with vgcreate -s option!
5. Create a 400MB logical volume (LV) called lvol0 on volume group vg0:
lvcreate -L 400M -n lvol0 vg0
This lvcreate command will create a softlink /dev/vg0/lvol0 point to a correspondence block device file called /dev/mapper/vg0-lvol0.
6. The Linux LVM setup is almost done. Now is the time to format logical volume lvol0 to create a Red Hat Linux supported file system, i.e. EXT3 file system, with 1% reserved block count:
mkfs -t ext3 -m 1 -v /dev/vg0/lvol0
7. Create a mount point before mounting the new EXT3 file system:
mkdir /mnt/vfs
8. The last step of this LVM tutorial – mount the new EXT3 file system created on logical volume lvol0 of LVM to /mnt/vfs mount point:
mount -t ext3 /dev/vg0/lvol0 /mnt/vfs
To confirm the LVM setup has been completed successfully, the df -h command should display these similar message:
/ dev/mapper/vg0-lvol0 388M 11M 374M 3% /mnt/vfs
Some of the useful LVM commands reference:
vgdisplay vg0
To check or display volume group setting, such as physical size (PE Size), volume group name (VG name), maximum logical volumes (Max LV), maximum physical volume (Max PV), etc.
pvscan
To check or list all physical volumes (PV) created for volume group (VG) in the current system.
vgextend
To dynamically adding more physical volume (PV), i.e. through new hard disk or disk partition, to an existing volume group (VG) in online mode. You’ll have to manually execute vgextend after pvcreate command that create LVM physical volume (PV).
No comments:
Post a Comment